Wakol Intercoll D 3454 2K Polychloroprene Latex Adhesive

It’s a water-based adhesive for 2-component spray application and is described as a solvent-free contact adhesive.

It’s suitable for bonding absorbent and non-absorbent substrates such as polyurethane foam, latex foam, textiles, felt and wood.

Yes. It’s used in combination with an activator, and in spray-mix application it’s mixed with Intercoll D 3437 Activator. Wakol Intercoll D 3437 2K Activator

The product can be applied using air-mix spray guns and suitable low-pressure airless guns.

No. It’s supplied ready for use, and no dilution is necessary for normal use.

No. The it must not be blended with other adhesives.

Bonding surfaces have to be free of dirt, dust and grease.

The open time is approximately 10 minutes, depending on adhesive amount, temperature and surrounding air humidity.

The processing temperature should be more than +15 °C.

Clean with water while fresh. After drying, use Intercoll L 1815 Löser 31, and avoid cleaning agents that can interfere with adhesion (such as silicones or oils).

Do not inhale the spray mist. Use an exhausting system, and if necessary use personal protective equipment such as a breathing mask.