Cascamate Two Part Super Fast Cure Mitre Bond Kit

Cascamate provides an instant bond in approximately 30 seconds.

The activator accelerates curing even further.

Always allow the bond to fully cure before applying load or stress.

Cascamate is suitable for multi-surface bonding, including:

• Timber
• Plastics
• Rubber
• Metal
• Ceramics
• Leather
• Tough polymers

Yes. Cascamate is DMPT-free and non-carcinogenic.

It offers a safer alternative to traditional mitre bond adhesives while maintaining professional performance.

No. Cascamate has a non-staining formula.

It ensures a clean, professional finish on visible joints and decorative work.

Follow these steps:

1. Ensure both surfaces are smooth, clean, and free from dust
2. Apply glue sparingly to one surface
3. Lightly spray the activator onto the other surface
4. Align and press the parts together immediately
5. Apply sufficient clamping pressure
6. Allow the joint to fully cure before use

Excess adhesive can be removed with solvents such as acetone.

The high-viscosity adhesive offers excellent control.

It is ideal for vertical applications and precision mitre joints, preventing run-off during bonding.

• Cascamate is supplied in the following kits:
  • 250ml kit: 50ml adhesive + 200ml activator
  • 500ml kit: 100ml adhesive + 400ml activator

Store in original containers in a cool, dry place.

Recommended storage temperature is between 5°C and 7°C.

When stored correctly, Cascamate has a shelf life of at least 12 months.

Yes. Cascamate is extremely flammable.

• Use only in well-ventilated areas
• Keep away from heat, sparks, and open flames
• Avoid skin and eye contact
• Keep out of reach of children

Always follow safety instructions and consult the Safety Data Sheet if required.