Permabond

Engineering Adhesives. Permabond’s history of developing and manufacturing engineering adhesives spans four decades and three continents. Today, Permabond Engineering Adhesives Ltd (Europe &…

"Our all-weather adhesives and binders deliver year-round installation capability for sports and play contractors who need certified high-performance bonds delivered on time every time."

The Chemistry of the Comfort Sandwich

0:00 / 0:00

Tap to enable audio

Filters

Permabond C910 MV Metal Cyanoacrylate Adhesive

PERMABOND C910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.

£15.27 (ex VAT)

£18.32 (inc VAT)

View

Permabond CSA Cyanoacrylate Activator

Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a fastercure and to extend their gap-filling capabilities.

£64.12 (ex VAT)

£76.94 (inc VAT)

View

Permabond ES562 Single Part Epoxy Resin

PERMABOND ES562 is a single-part epoxy adhesive which flows like solder when heated during curing. The adhesive has excellent adhesion to metal surfaces and composites.

£125.78 (ex VAT)

£150.94 (inc VAT)

View

Permabond ES566 Single Part Epoxy Resin

PERMABOND ES566 is a single-part epoxy adhesive which has excellent adhesion to metal surfaces, composites and difficult to bond plastics (such as Nylon, PBT etc.). The high bond strength ofthis adhesive allows it to replace mechanical fastening,...

£93.82 (ex VAT)

£112.58 (inc VAT)

View

Permabond ET5429 2K Structural Adhesive

PERMABOND ET5429 is a thixotropic two-part adhesive with excellent resistance to impact and vibration. The controlled flow properties as well as its ease of mixing and application, enables the adhesive to be used where gap filling or vertical...

£24.24 (ex VAT)

£29.09 (inc VAT)

View

Permabond Initiator 41

Permabond Initiator 41 is used in conjunction with Permabond TA(structural acrylic) adhesives as a no-mix resin and initiator system. Its solvent free formulation allows a long open time if required.

£170.27 (ex VAT)

£204.32 (inc VAT)

View

Permabond TA437 Acrylic Adhesive

PERMABOND TA437 is a single component structural acrylic adhesive designed primarily for bonding metals, ferrites and ceramics. The typical fixture time of TA437 when used with Initiator 41 is 20-30 seconds.

£57.85 (ex VAT)

£69.42 (inc VAT)

View

Permabond TA4610 Toughened Acrylic Adhesive

PERMABOND TA4610 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene –with no primer or surface treatment required.

£26.93 (ex VAT)

£32.32 (inc VAT)

View

Permabond UV6302 UV Curing Adhesive

PERMABOND UV6302 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate.

£37.39 (ex VAT)

£44.87 (inc VAT)

View

Permabond 102 GP Cyanoacrylate C2 Adhesive

PERMABOND 102 is a low viscosity general purpose cyanoacrylate adhesive suitable for bonding close-fitting components. It is fast setting and suitable for use on plastics, rubber and metals.

£20.58 (ex VAT)

£24.70 (inc VAT)

View

Permabond 4C20 Cyanoacrylate Adhesive

PERMABOND 4C20 is an intermediate viscosity, medical device grade, cyanoacrylate that is used to bond through intermediate gaps. It is fast setting and suitable for use on plastics, rubber and metals.

£60.21 (ex VAT)

£72.25 (inc VAT)

View

Permabond A025 High Strength Threadlock

Permabond A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components.

£38.11 (ex VAT)

£45.73 (inc VAT)

View

Permabond A131 Pipe Sealant

Permabond A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water.

£12.52 (ex VAT)

£15.02 (inc VAT)

View

Permabond A905 Anaerobic Activator

Permabond A905 Surface Activator is designed to allow non-metallic surfaces to be bonded/sealed. It also accelerates the cure rate of anaerobics and improves bonding to contaminated surfaces. It will also allow the adhesive to cure in a larger gap.

£18.12 (ex VAT)

£21.74 (inc VAT)

View

Engineering Adhesives.

Permabond’s history of developing and manufacturing engineering adhesives spans four decades and three continents. Today, Permabond Engineering Adhesives Ltd (Europe & Asia) and Permabond LLC (Americas) provide technological solutions to engineers all over the world, with offices and facilities in America, Asia and Europe, backed by a high-tech ISO 9001:2015 certified production plant in Italy and a brand new manufacturing and research and development site in Winnall, Hampshire, UK.

Browse our products

Permabond

Filters

Filters

Permabond C910 MV Metal Cyanoacrylate Adhesive

Permabond CSA Cyanoacrylate Activator

Permabond ES562 Single Part Epoxy Resin

Permabond ES566 Single Part Epoxy Resin

Permabond ET5429 2K Structural Adhesive

Permabond Initiator 41

Permabond TA437 Acrylic Adhesive

Permabond TA4610 Toughened Acrylic Adhesive

Permabond UV6302 UV Curing Adhesive

Permabond 102 GP Cyanoacrylate C2 Adhesive

Permabond 4C20 Cyanoacrylate Adhesive

Permabond A025 High Strength Threadlock

Permabond A131 Pipe Sealant

Permabond A905 Anaerobic Activator

QUICK LINKS

Contact Us