Glue Activator

Adhesive Activation

A glue activator, also known as an adhesive activator or adhesive accelerator, is used to speed up the curing and bonding process of compatible glues and adhesives. Glue activators are commonly used…

"Our all-weather adhesives and binders deliver year-round installation capability for sports and play contractors who need certified high-performance bonds delivered on time every time."

The Chemistry of the Comfort Sandwich

0:00 / 0:00

Tap to enable audio

Filters

Loctite 7649 Anaerobic Activator

LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.

£20.69 (ex VAT)

£24.83 (inc VAT)

View

Permabond A905 Anaerobic Activator

Permabond A905 Surface Activator is designed to allow non-metallic surfaces to be bonded/sealed. It also accelerates the cure rate of anaerobics and improves bonding to contaminated surfaces. It will also allow the adhesive to cure in a larger gap.

£18.12 (ex VAT)

£21.74 (inc VAT)

View

Permabond CSA Cyanoacrylate Activator

Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a fastercure and to extend their gap-filling capabilities.

£64.12 (ex VAT)

£76.94 (inc VAT)

View

Permabond Initiator 41

Permabond Initiator 41 is used in conjunction with Permabond TA(structural acrylic) adhesives as a no-mix resin and initiator system. Its solvent free formulation allows a long open time if required.

£170.27 (ex VAT)

£204.32 (inc VAT)

View

Adtech 1010 Methacrylate Activator - Fast Cure (use with Adtech 9146)

Adtech 1010 Acrylic Activator Fast

Adtech 1010 Activator is fast curing activator used with Adtech 9146, a two component structural methacrylate adhesive.

£231.17 (ex VAT)

£277.40 (inc VAT)

View

Adtech 1002 Cyanoacrylate Activator - Superfast

Adtech 1002 Super Fast Cyanoacrylate Activator

Adtech® 1002 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.

£92.09 (ex VAT)

£110.51 (inc VAT)

View

Rosehill Flexilon FX1117 Wet Pour Accelerator & Primer

Rosehill FX1117 Wet Pour Accelerator & Primer

Rosehill Flexilon FX1117 is a low viscosity, solvent-free, single component rubber pre-treatment accelerator for use in conjunction with Rosehill Flexilon wet pour polyurethane binders.

£16.72 (ex VAT)

£20.06 (inc VAT)

View

NEW

Cascamite Accelerator

Cascamite Accelerator is a hardener for Cascamite Powdered Resin Wood Glue that significantly speeds up the curing process, bringing the glue to handling strength in about 25 minutes.

£9.46 (ex VAT)

£11.35 (inc VAT)

View

Adhesive Accelerator

Turfstikk PU500 Artificial Grass Adhesive Accelerator

Turfstikk PU500 Accelerator is a catalyst designed to accelerate the curing of Turfstikk PU500 two-component polyurethane adhesive when used in lower temperature environments.

£6.30 (ex VAT)

£7.56 (inc VAT)

View

Adtech 1001 – DMPT Free Cyanoacrylate Activator

Adtech 1001 is a DMPT-free, solvent-based activator that increases the cure speed of Adtech cyanoacrylate adhesives. It is ideal for on-demand curing and can be used to fillet-cure adhesive outside the joint.

£10.45 (ex VAT)

£12.54 (inc VAT)

View

Woodstikk Mitre Stikk Adhesive Kit

Woodstikk® Mitre Stikk Adhesive kit comprises of a high viscosity superfast cyanoacrylate adhesive and an aerosol containing activator. It is designed for the bonding of a wide range of plastics, rubbers, timber, metal components, fabrics,...

£13.89 (ex VAT)

£16.67 (inc VAT)

View

Adtech 1008 Methacrylate Activator – Slow Cure

Adtech 1008 Activator is slow curing activator used with Adtech 9146, a two component structural methacrylate adhesive.

£85.62 (ex VAT)

£102.74 (inc VAT)

View

A glue activator, also known as an adhesive activator or adhesive accelerator, is used to speed up the curing and bonding process of compatible glues and adhesives.

Glue activators are commonly used with cyanoacrylate adhesives, also known as super glue, to create fast, reliable bonds. The activator is applied to one surface before the adhesive is brought into contact, helping the adhesive cure quickly and form a stronger bond.

They are particularly valuable where rapid bonding is critical — such as in woodworking, model making, field repairs, rubber bonding and industrial assembly.

Benefits of using a glue activator:

Near-instant bond formation compared with standard cure time
Improved bond strength on difficult substrates
Works on wood, metal, rubber, ceramics and most plastics
Reduces clamping time in production environments

Speak to our technical team about the right activator for your adhesive and substrate.

Browse our products

Glue Activator

Adhesive Activation

Filters

Filters

Loctite 7649 Anaerobic Activator

Permabond A905 Anaerobic Activator

Permabond CSA Cyanoacrylate Activator

Permabond Initiator 41

Adtech 1010 Acrylic Activator Fast

Adtech 1002 Super Fast Cyanoacrylate Activator

Rosehill FX1117 Wet Pour Accelerator & Primer

Cascamite Accelerator

Turfstikk PU500 Artificial Grass Adhesive Accelerator

Adtech 1001 – DMPT Free Cyanoacrylate Activator

Woodstikk Mitre Stikk Adhesive Kit

Adtech 1008 Methacrylate Activator – Slow Cure

QUICK LINKS

Contact Us